Bldc Motor Control Driver 18V~50VDC 18V~50VDC0-300w Bldc Motor Driver Controller

bldc motor control driver 18V~50VDC 18V~50VDC0-300w Bldc Motor Driver controller

Description:

JKBLD300 brushless dc driver is suit the following three-phase sine wave power is 300W brushless dc motor speed regulation, can provide an external potentiometer control, external analog voltage control, PC (such as PLC, SCM) PWM speed regulation, and other functions. At the same time the drive have large starting torque, quick start and brake, and positive & negative switching, combination of manual and automatic control.

Suit motors:

 

Model
Specification	Unit	JK57BLF01	JK57BLF02	JK57BLF03	JK57BLF04
Number Of Phase	Phase	3
Number Of Poles	Poles	4
Rated Voltage	VDC	36
Rated Speed	Rpm	4000
Rated Torque	N.m	0.11	0.22	0.33	0.44
Rated Current	Amps	2	3.6	5.3	6.8
Rated Power	W	46	92	138	184
Peak Torque	N.m	0.33	0.66	1	1.32
Peak Current	Amps	6.8	11.5	15.5	20.5
Back E.M.F	V/Krpm	7.7	7.4	7.3	7.1
Torque Constant	N.m/A	0.073	0.07	0.07	0.068
Rotor Inertia	g.c㎡	75	119	173	230
Body Length	mm	47	67	87	107
Weight	Kg	0.44	0.75	1	1.25
Sensor	Honeywell
Insulation Class	B
Degree of Protection	IP30
Storage Temperature	-25～+70℃
Operating Temperature	-15～+50℃
Working Humidity	85% RH
Working Environment	Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude	1000 meters or less

 

 

		Model
Specification	Unit	JK60BLS01	JK60BLS02	JK60BLS03	JK60BLS04
Number Of Phase	Phase	3
umber Of Poles	Poles	8
Rated Voltage	VDC	48
Rated Speed	Rpm	3000
Rated Torque	N.m	0.3	0.6	0.9	1.2
Rated Current	Amps	2.8	5.2	7.5	9.5
Rated Power	W	94	188	283	377
Peak Torque	N.m	0.9	1.8	2.7	3.6
Peak Current	Amps	8.4	15.6	22.5	28.5
Back E.M.F	V/Krpm	12.1	12.6	12.4	13.3
Torque Constant	N.m/A	0.116	0.12	0.118	0.127
Rotor Inertia	Kg.c㎡	0.24	0.48	0.72	0.96
Body Length	mm	78	99	120	141
Weight	Kg	0.85	1.25	1.65	2.05
Sensor	Honeywell
Insulation Class	B
Degree of Protection	IP30
Storage Temperature	-25～+70℃
Operating Temperature	-15～+50℃
Working Humidity	<= 85% RH
Working Environment	No direct sunlight, non-corrosive gas, flammable gas, oil mist, no dust.
Altitude	1000m or below

 

Connection Definition:

Speed Adjustment Instruction:                                                                   Motor Speed Quick Response Setting:

A. Motor speed adjusted by the internal potentiometer RV                                    OP/CL Connected (user setting):

B. Motor speed adjusted by the external potentiometer                                         PID Closed loop－Motor quick response

C. Motor speed adjusted by analog signal 0V~+5V input                                       OP/CL Disconnected (factory setting):

D. Motor speed adjusted by analog signal 0V~+10V input                                     NO PID Closed loop－Motor normal response

E. Motor speed adjusted by PWM input:                                                                 Lead Wire Connection:

Pulse duty ratio 10%-90% / Speed linear modulation                                             Take care of the sequence of U,V,W

Pulse rate: 1K-10K/ pulse amplitude 5V