Home ProductsBrushless DC Motor Driver

JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver

JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver

  • JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver
  • JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver
JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver
Product Details:
Place of Origin: Jiangsu, China (Mainland)
Brand Name: Jkongmotor
Certification: CE, ROHS,ISO9001
Model Number: JKBLD750
Payment & Shipping Terms:
Minimum Order Quantity: 1PCS
Price: US$41.5~US$54
Packaging Details: with export carton . big quantity with pallet
Delivery Time: For samples , 7-15 days / For batch , 15-25days
Payment Terms: T/T , paypal , Western Union, L/C
Supply Ability: 100000pcs/month
Contact Now
Detailed Product Description
Model No.: JKBLD750 Supply Voltage: 18VDC - 50VDC
Current: 0A - 45A Weight: 580g
Suitable Motor Speed: 0-20000RPM Motor Hall Sensor Angle: 120°/240°
High Light:

3 phase bldc motor driver

,

motor driver

CNC Brushless DC Motor Driver JKBLD750 For 0W - 750W 1HP 3000RPM 48V BLDC Motor

 

Description:

The BLD750 BLDC motor drive is a high performance, cost-effective 3phase BLDC motor drive, which can provide power output Max 750VA.The design is based on advanced DSP technology and feature high torque, low noise, low vibration, PID speed loop, PID current loop, over current protection, over load protection and a combined use of manual speed adjustment and automatic speed adjustment.

 

Connection Definition:

 Mark  Definition
 DC+/DC-  DC Power Input (DC24V~DC48V)
 U,V,W  Motor Lead Wire
 Hu,Hv,Hw  Hall Sensor Lead Wire
 REF+  Hall Sensor Power Supply +
 REF-  Hall Sensor Power Supply -
 VCC  External Potentiometer Power Supply ( Internal Power Supply Only)
 SV  External Potentiometer ( No Connection When Adjusting Speed With  Internal Potentiometer ) or Pulse Rate In Note
 COM  Common (Low Level/Ground)
 F/R  Direction: Low Level/CCW High Level or No Connection/CW Note
 EN  Enable: High Level/Stop Low Level/Run Note
 BRK  Quick Brake: High Level/Stop Low Level/Run Note
 SPEED  Speed Signal Output
 ALARM  Alarm Signal Output

 

Note①: Potentiometer/10KΩ or analog signal DC 0V~+5V (Change

internal switch J1/DC0-10V).Turn off the internal potentiometer RV

when using an external potentiometer to adjust the motor speed.

Note②:High level/5V (5mA)

 

Peak Power Output Setting:

JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver 0

Note: To protect the motor, set the arrow number as the same as the motor nominated power. Whenever overload occurs the drive will turn out to be the protection mode.

 

Connection:

JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver 1

Mechanical Drawings:
JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver 2
 

Speed Adjustment Instruction:

 

Motor Speed Adjusted By The Internal Potentiometer RV:

SW1/ Off (Factory setting)

 

Motor Speed Adjusted By Analog DC 0V~+5V Input:

SW1/ Off (Factory setting) set J1 (internal) asJKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver 3 (user Setting) RV—Turn Off

 

Motor Speed Adjusted By Analog DC 0V~+10V Input:

SW1/ Off (Factory setting) set J1 (internal) as JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver 4(user Setting) RV—Turn Off

 

Motor Speed Adjusted By Pulse Rate Input:

Pulse rate: 0K—3KHZ Speed linear modulation

Pulse amplitude: 5V Pulse duty ratio: 50%

SW1/ On (User setting) RV—Turn Off

J7 (Internal)/ Switch on with the jumper cap on J1 (User setting)

 

Motor Speed Quick Response Setting:

SW2/ On ( User setting): PID closed loop--quick speed response

SW2/Off (Factory setting): Open loop--Normal speed response

 

Motor Speed Signal Output:

Connecting SPEED and COM to get pulse output F=N*P/60

F—Pulse output frequency

P—Pole number of BLDC motor

Drive Alarm Output:

When drive alarm, it will break over with the port of COM and be low

level. The drive stop to work and alarm light run.

Lead Wire Connection: Take care of the sequence of U,V,W

 

Motor Parameter set by ICAN BLDD-01 (Optional) :

 

RS232 Communication Interface CP-in

The BLDD48-45A BLDC motor drive support RS232 communication Protocol to set motor run-up time, etc. When choose ICAN BLDD-01 as host controller, the operating process and instruction as below:

 

ICAN BLDD-01 Motor Setting Panel Operating Process:

Connect to CP-in (BLDD48-45A)

SW1/ Off (Factory setting) RV—Turn Off

 

BLDD-01 Parameter Setting Table:

 

Function code Mode Setting range Unit Factory setting Alteration
P000 Control mode

00 BLDD-01 control

01 None host control

  None Panel control
P001 Panel setting speed 0~Rated speed RPM  
P002 Run-up time 0.1~9.9 S 0.2
P003 Motor pole number setting 1~99 Pole pairs 4
P004 CW CCW

01 CW

00 CCW

  01
P005         Reserved
P006         Reserved

 

BLDD-01 Panel Setting Process:

1. Turn on the power supply, press <Set> to stop the motor

2. Press <▲> or <▼> to choose the mode you need (Press Esc return and motor running)

3. Press <Set> enter into parameter mode (Press Esc return and motor running)

4. Press <JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver 5> or <JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver 6> to change the parameter (flashing)

5. Press <Set> to reserve, parameter stop to flash. Press <Esc> return and motor running.

 

Panel Protection Mode:

When the system running, panel nixie light shows Err×

Err0 represents Over-voltage or Over-temperature protection

Err1 represents Over-current protection

Err2 represents Hall sensor error protection

 

 

Motor Parameter set by other host controller:

 

BLDD48-45A Communication Protocol (RS232)

 

1. Communication Interface:

Asynchronous serial communication

Baud rate:2400

Start bit:1 bit

Stop bit:1 bit

Data bit:8 bits

Even/odd parity:none

Communication interface voltage:3.3V

 

2.Communication Protocol:

 

Function1:Motor speed controlled by drive BLD-750 itself

Communication format :“i”

Instruction:send a character

 

Function2:Motor speed controlled by host computer

Communication format:“o”

Instruction:send a character

 

Function3:Motor speed set by host computer

Communication format:“v”0X00,0X00

Instruction:send a character “v” then two hexadecimal numbers

the high 16bits,the low 16 bits

 

Function4:run-up time

Communication format:“y“ 0X00

Instruction:send “y“ then a hexadecimal number

 

JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver 7JKBLD750 Brushless CNC DC Motor Driver , 750W 1HP 3000RPM 48v Motor Driver 8

 

Contact Details
CHANGZHOU JKONGMOTOR CO.,LTD

Contact Person: Stacy

Tel: +8613776803450

Send your inquiry directly to us (0 / 3000)

Contact

Address: Building A2,Hutang Industrial zone,Lingdao Rd,Wujin District,Changzhou,China.Zip:213162

Factory Address:Building A2,Hutang Industrial zone,Lingdao Rd,Wujin District,Changzhou,China.Zip:213162