Mini 180g Cm 300g Cm Nema 8 Bipolar Stepper Motor 20mm 0.8A

Hybrid Mini Stepper Motor Nema8 20mm Unipolar Step Motor 180g.cm 300g.cm

A hybrid stepper motor has an axially magnetized rotor, meaning one end is magnetized as a north pole, and the other end a south pole. Toothed rotor cups are placed on each end of the magnet, and the cups are offset by half of a tooth pitch.

1.Genaral Specification:

2.Electrical Specification:

Matching Stepper motor Driver: JK0220

3.Dimensions: (Unit=mm)

4.Drawing:

5.Our service

We do also manufacture other products,such as

Nema8 , nema11 , nema14 , nema17 , nema23 , nema24 , nema34 , nema42 , nema52 stepper motor;

Nema11 , nema17 , nema23 , nema24 , nema34 stepper motor with gearbox.

Linear stepper motor , closed loop stepper motor , stepper motor with brake , stepper motor sriver;

42mm , 57mm , 60mm , 80mm , 86mm , 110mm ,  130mm brushless dc motor;

Bldc motor with gearbox , bldc motor driver;

Brush dc motor , spindle motor , ac servo motor kit , couplings , pulley , power supply and so on.

6.Advantages of Hybrid Stepper Motor

The advantages of the Hybrid Stepper Motor are as follows:-

• Low cost for control achieved
• High torque at startup and low speeds
• Ruggedness
• Simplicity of construction
• Can operate in an open loop control system
• Low maintenance
• Less likely to stall or slip
• Will work in any environment
• Can be used in robotics in a wide scale.
• High reliability
• The rotation angle of the motor is proportional to the input pulse.
• The motor has full torque at standstill (if the windings are energized)
• Precise positioning and repeatability of movement since good stepper motors have an accuracy of 3–5% of a step and this error is non-cumulative from one step to the next.
• Excellent response to starting/stopping/reversing.
• Very reliable since there are no contact brushes in the motor. Therefore, the life of the motor is simply dependent on the life of the bearing.
• The motors response to digital input pulses provides open-loop control, making the motor simpler and less costly to control.
• It is possible to achieve very low-speed synchronous rotation with a load that is directly coupled to the shaft.
• A wide range of rotational speeds can be realized as the speed is proportional to the frequency of the input pulses.