972oz.In 7NM 86H3P 1.2 Degree NEMA23 Stepper Motor open loop control

 
278oz.In - 972oz.In 2-7N.M 86H3P 1.2 Degree NEMA34 Stepping Motor
 
Stepping motor is an open-loop control element that converts electrical pulse signals into angular displacement or linear displacement. In the case of non-overload, the motor speed and stop position only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. When the stepper driver receives a pulse signal, it drives the stepper motor The set direction rotates at a fixed angle, called "step angle", and its rotation runs step by step at a fixed angle. The angular displacement can be controlled by controlling the number of pulses, so as to achieve the purpose of accurate positioning; at the same time, the speed and acceleration of the motor rotation can be controlled by controlling the pulse frequency, so as to achieve the purpose of speed regulation.
 
NEMA34 Stepping Motor Description:
NEMA34 stepping motor, 86mm 3 Phase square stepper motor.
45kg.cm Stepper motor, high torque stepper motor with 86mm size.
60kg.cm stepping motor.
 
NEMA34 Stepping Motor Genaral Specification:

 
NEMA34 Stepping Motor Specifications:

 
Dimensions:(Unit=mm)


 
Wiring Diagram:

Stepper Motor Advantages

Low cost for control achieved
High torque at startup and low speeds
Ruggedness
Simplicity of construction
Can operate in an open loop control system
Low maintenance
Less likely to stall or slip
Will work in any environment
Can be used in robotics in a wide scale.
High reliability
The rotation angle of the motor is proportional to the input pulse.
The motor has full torque at standstill (if the windings are energized)
Precise positioning and repeatability of movement since good stepper motors have an accuracy of 3–5% of a step and this error is non-cumulative from one step to the next.
Excellent response to starting/stopping/reversing.
Very reliable since there are no contact brushes in the motor. Therefore, the life of the motor is simply dependent on the life of the bearing.
The motors response to digital input pulses provides open-loop control, making the motor simpler and less costly to control.
It is possible to achieve very low-speed synchronous rotation with a load that is directly coupled to the shaft.
A wide range of rotational speeds can be realized as the speed is proportional to the frequency of the input pulses.

Applications

Computer controlled stepper motors are a type of motion-control positioning system. They are typically digitally controlled as part of an open loop system for use in holding or positioning applications.
In the field of lasers and optics they are frequently used in precision positioning equipment such as linear actuators, linear stages, rotation stages, goniometers, and mirror mounts. Other uses are in packaging machinery, and positioning of valve pilot stages for fluid control systems.
Commercially, stepper motors are used in floppy disk drives, flatbed scanners, computer printers, plotters, image scanners, compact disc drives, intelligent lighting, camera lenses, CNC machines and, more recently, in 3D printers.