Name: Nema 34 Stepper Motor Driver JK-HSD86 Closed Loop Stepper Driver 20V ~ 80VDC 0.1A - 10A
Brand: CHANGZHOU JKONGMOTOR CO.,LTD
SKU: JK-HSD86
Price: 39.00 USD
Availability: InStock

Home Products Stepper Motor Driver

Nema 34 Stepper Motor Driver JK-HSD86 Closed Loop Stepper Driver 20V ~ 80VDC 0.1A - 10A

Product Details:

Place of Origin:	Jiangsu, China (Mainland)
Brand Name:	Jkongmotor
Certification:	CE, ROHS,ISO9001
Model Number:	JK-HSD86

Payment & Shipping Terms:

Minimum Order Quantity:	3-10pcs
Price:	US$35~US$43
Packaging Details:	with export carton . big quantity with pallet
Delivery Time:	For samples , 3-7 days / For batch , 10-15days
Payment Terms:	T/T , paypal , Western Union, L/C
Supply Ability:	100000pcs/month

Contact Now

Detailed Product Description

Supply Voltage:	20VDC - 80VDC	Current:	0.1A - 10A
Weight:	600g	Storage Temperature:	-20℃ － 65℃
Matched Motor:	Nema34 Closed Loop Stepper Motor	Certified:	CE ROHS
Matched Motor:	Nema34
Highlight:	3 axis stepper motor driver , cnc stepper motor driver

NEMA34 Closed Loop Stepper Motor Driver JK-HSD86 20V ~ 80VDC 0.1A - 10A

Electrical Specifications

Parameter	Min	Typical	Max	Unit
Input Voltage (JK-HSD86)	20	36 48	50	VDC
Input Voltage (JK-HSD86C)	24	36 48	80	VDC
Input Voltage (SC8680C)	24VAC	60AC	80VAC 100VDC	VVDC
Output Current	0.1	-	10(Peak)	A
Pulse Input Frequency	0	-	200	kHz
Logic Signal Current	7	10	16	mA
Isolation Resistance	500	-	-	MΩ

Operating Environment

Cooling	Natural Cooling or Forced cooling
Operating Environment	Environment	Avoid dust, oil fog and corrosive gases
	Storage Temperature	-20℃ － 65℃ (-4℉ － 149℉)
	Ambient Temperature	0℃ － 50℃ (32℉ － 122℉)
	Humidity	40%RH － 90%RH
	Operating Temperature	70℃ (158℉) Max
	(Heat Sink)	70℃ (158℉) Max
Weight	580 g (20.5 oz)

Connectors and Pin Assignment
The JK-HSD86 has four connectors, connector for control signals connections, connector for status signal connections,connector for encoder feedback and connector for power and motor connections.

Control Signal Connector				–	Screw Terminal
Pin	Name	I/O	Description

1	PUL+	I	Pulse Signal: In single pulse (pulse/direction) mode, this input represents pulse signal, each
			rising or falling edge active (software configurable, see easy servo drive software manual for
			more detail); In double pulse mode (software configurable), this input represents clockwise

2	PUL-	I
			(CW) pulse, active both at high level and low level. 4.5-28V when PUL-HIGH, 0-0.5V when
			PUL-LOW. For reliable response, pulse width should be longer than 2.0				μ	s.

3	DIR+	I	Direction Signal: In single-pulse mode, this signal has low/high voltage levels, representing
			two directions of motor rotation. In double-pulse mode (software configurable), this signal
			is counter-clock (CCW) pulse, active both at high level and low level. For reliable motion
			response, DIR signal should be ahead of PUL signal by			2us at least. 4.5-28V when DIR-HIGH,
4	DIR-	I
			0-0.5V when DIR-LOW. Please note that rotation direction is also related to
			motor-driver-encoder wiring match. Exchanging both the connection of two wires for a coil
			and an encoder channel to the driver he connection will reverse motion direction. Or you
			can toggle the SW5 to reverse the motion direction.

5	ENA+	I	Enable Signal: This signal is used for enabling/disabling the driver. In default, high level
			(NPN control signal) for enabling the driver and low level for disabling the driver. Usually
			left UNCONNECTED (ENABLED). Please note that PNP and Differential control signals are on
6	ENA-	I
			the contrary, namely Low level for enabling. The active level of ENA signal is software
			configurable.