Stepping Motor NEMA 17 High Torque 37OZ.IN 2.6kg.cm 24V 1.33A With Black Endcap 1m Wires

42HS Series Stepping Motor NEMA 17 High Torque 37OZ.IN 24V Height 34mm With Black Endcap

The combination of two motors like a permanent magnet and variable reluctance is known as a hybrid motor. The working principle of a hybrid motor is, the rotor in this motor is magnetized axially similar to a permanent magnet stepper motor, whereas the stator is energized electromagnetically similar to a variable reluctance stepper motor. So it is an actuator that changes electrical pulses to angular displacement.

1.Electrical Specification:

2.Genaral Specification:

3.Drawing

4.Stepper motor angle

Stepper motors for 3D printers require a step angle of 1.8°.

There are 200 steps in one rotation, because 1.8° x 200=360°, you can choose a smaller angle and more precise.

But if the angle is larger, it needs to be used with the speed reduction gear.

5.Current and power

When selecting a stepper motor, pay attention to the rated voltage and current parameters.

As long as the stepper motor drive power can control the current output, it is theoretically possible to use any supply voltage higher than the rated voltage of the motor.

If the drive power cannot control the current, you need to use a supply voltage close to the rated voltage, otherwise the motor will be at risk of overheating.

Stepper Motor Advantages

• Low cost for control achieved
• High torque at startup and low speeds
• Ruggedness
• Simplicity of construction
• Can operate in an open loop control system
• Low maintenance
• Less likely to stall or slip
• Will work in any environment
• Can be used in robotics in a wide scale.
• High reliability
• The rotation angle of the motor is proportional to the input pulse.
• The motor has full torque at standstill (if the windings are energized)
• Precise positioning and repeatability of movement since good stepper motors have an accuracy of 3–5% of a step and this error is non-cumulative from one step to the next.
• Excellent response to starting/stopping/reversing.
• Very reliable since there are no contact brushes in the motor. Therefore, the life of the motor is simply dependent on the life of the bearing.
• The motors response to digital input pulses provides open-loop control, making the motor simpler and less costly to control.
• It is possible to achieve very low-speed synchronous rotation with a load that is directly coupled to the shaft.
• A wide range of rotational speeds can be realized as the speed is proportional to the frequency of the input pulses.

Applications

Computer controlled stepper motors are a type of motion-control positioning system. They are typically digitally controlled as part of an open loop system for use in holding or positioning applications.

In the field of lasers and optics they are frequently used in precision positioning equipment such as linear actuators, linear stages, rotation stages, goniometers, and mirror mounts. Other uses are in packaging machinery, and positioning of valve pilot stages for fluid control systems.

Commercially, stepper motors are used in floppy disk drives, flatbed scanners, computer printers, plotters, slot machines, image scanners, compact disc drives, intelligent lighting, camera lenses, CNC machines and, more recently, in 3D printers.