Nema42 Bipolar Hybrid Stepper Motor High Holding Torque 8N.m To 25 N.m With 4 lead wires

Nema42 Bipolar Hybrid Stepper Motor High Holding Torque 8N.m To 25 N.m With 4 lead wires
1.Applications:
Use for

• Industry of automation
• Medical and health care equipment
• 3d printer machines
• Packing devices
• Information Technology
• Household appliance products

 
Our Company offers three major series of products:

• Hybrid Stepper motors, Brushless Dc motor and Dc Brush motor.
• We are always continues develop new type models.
• We are also have several joint venture companies who specialized in the production of AC servo motor, PM stepper motors, Spindle motor and Motor drivers.

2.Genaral Specification:

 
3.Electrical Specification:

Matching Stepper motor Driver: JK2M2283
 
4.Dimensions: (Unit=mm)

 
5.Wiring Diagram:

6.Photos Nema42 Bipolar Hybrid Stepper Motor

 
Stepper Motor Advantages

• Low cost for control achieved
• High torque at startup and low speeds
• Ruggedness
• Simplicity of construction
• Can operate in an open loop control system
• Low maintenance
• Less likely to stall or slip
• Will work in any environment
• Can be used in robotics in a wide scale.
• High reliability
• The rotation angle of the motor is proportional to the input pulse.
• The motor has full torque at standstill (if the windings are energized)
• Precise positioning and repeatability of movement since good stepper motors have an accuracy of 3–5% of a step and this error is non-cumulative from one step to the next.
• Excellent response to starting/stopping/reversing.
• Very reliable since there are no contact brushes in the motor. Therefore, the life of the motor is simply dependent on the life of the bearing.
• The motors response to digital input pulses provides open-loop control, making the motor simpler and less costly to control.
• It is possible to achieve very low-speed synchronous rotation with a load that is directly coupled to the shaft.
• A wide range of rotational speeds can be realized as the speed is proportional to the frequency of the input pulses.